The use of explosion -proof shafts involves a series of operation steps and precautions. The following are some key points:
1. Check before running: Make sure the fan can be put into use after inspection and passing.The inspection content may include the integrity of the fan, whether the fastener is loose, and whether the electrical connection is normal.
2. Starting operation: Start the explosion -proof shaft fans in the order of booting.After starting, when the wind motor reaches the normal speed, it should immediately open the air inlet valve and adjust it to the required position.
3. Monitoring operating status: During the fan operation, it is necessary to check whether the bearing temperature is normal.Under normal circumstances, the temperature of the bearings must not exceed the prescribed higher temperature limit (generally 65 ° C).At the same time, pay attention to the sound of monitoring fan and bearings to observe whether the vibration is normal.If the fan is found to have violent vibration, impact, bearing temperature and other abnormal phenomena, it must be stopped to find out the reason.
4. Adjustment and control: According to the specific usage, you may need to adjust the operating parameters of the fan, such as air volume and wind pressure.This can usually be achieved by controlling the opening of the wind valve and adjusting the motor speed.
5. Maintenance: regularly clean up and maintain the fan, especially to clean the ash and dirt on the blades to prevent rust.In addition, regular inspections and maintenance should be performed in accordance with the manufacturers recommendations to ensure the stable operation of the fan.
It should be noted that explosion -proof shaft flowers are usually used in places with explosive danger, so they must strictly abide by relevant safety regulations and operating procedures during use.In addition, non -professional personnel shall not disassemble or repair the fan at will to avoid accidents.
In short, the correct use of explosion -proof shaft flowers requires a series of operation steps and precautions to ensure the safety and efficient operation of the fan.If you have doubts about the specific use steps or operation details, it is recommended to consult a manufacturer or professional technician.