Pay attention to the following matters when installing:
1. Check the equipment: Before installation, carefully check whether the various components of the side wall fan are complete, no damage and rust.Ensure that key components such as rectifiers, blades and motors are intact and can be operated normally.
2. Select the installation location: Select a suitable installation location to ensure that the air flow is good and the distance from the wall is appropriate to avoid affecting the ventilation effect.At the same time, it is necessary to ensure that the installation location is stable and reliable, and can withstand the weight and vibration of the fan.
3. Check the power supply: Before installation, confirm whether the power supply meets the requirements and check whether the power supply is stable.Ensure that the power line is intact, and the wiring method meets relevant specifications and standards to prevent electrical failures and safety accidents.
4. Fixed device: Make sure that there are sufficient fixed devices between the fan and the ground or the wall to prevent safety issues caused by vibration.The fixed device should be firm and reliable and can withstand the operating load of the fan.
5. Follow the installation guide: During the installation process, follow the instructions and installation guidelines of the equipment.Do not change the structure and circuit connection method of the fan at will, so as not to cause damage or safety hazards of equipment.
6. Horizontal installation: Pay attention to ensuring that the installation level of the fan is straight, which helps ensure the normal operation of the fan and extend the service life.
7. Clean up debris: Before installation, erase the oil, paint and other debris on the basics to ensure that the installation environment is clean and tidy.
8. Testing and debugging: After the installation is completed, perform the necessary testing and debugging to ensure that the fan can run normally without abnormal noise and vibration.
9. Maintenance: After the installation is completed, it is necessary to check and maintain the side wall fan on a regular basis.Clean up the dust and debris inside the fan, check whether the wires and accessories are aging or damaged, and replace or repair it in time.
10. Safety operation: Pay attention to safety issues during maintenance.Turn off the power switch and disconnect the power line to ensure safe operation.At the same time, do not disassemble the components of the fan at will or change the structure of the fan, so as not to cause damage or safety hazards of equipment.
Follow the above precautions to ensure that the side wall fan is installed correctly and runs safely and stable.