Adopt advanced front -plug blades, low -noise outer rotor or internal rotor motor direct transmission. The square shell design can be easily installed on the concrete wall, brick wall or light steel pressure wall plate.nice appearance.
Methods and steps for installation method and steps of wall fan
Preparatory work: Cooked instructions, understand the installation requirements and specific steps of the wall fan, and prepare for the installation tools, such as the horizontal instrument, the whole station instrument, the marking pen, etc.At the same time, check whether each component of the wall fan is complete, especially the key parts such as motors, blades, and bearing.
Installation foundation: The installation foundation of the wall fan must be stable and strong enough to withstand the vibration and load of the fan when running.According to the design requirements, determine the size and location of the foundation, and construct in accordance with the requirements.
Installation bracket: Institute the bracket in the corresponding position according to the requirements of the statement.The installation of the bracket must be vertically vertically, and the horizontal meter can be calibrated.
Install motor: Install the motor on the bracket and ensure that the motor and the bracket are closely connected to avoid vibration or noise.
Install the blade: Install the blade on the motor axis according to the requirements of the statement.The installation of the blades must be firm to avoid loosening or falling off.
Connect the power: connect the power cord to the motor and make sure that the connection is close and firm.
Debugging: After completing the above steps, you can connect the power and start the wall fan for debugging.Check whether the fan can operate normally, whether there are abnormal noise or vibrations, and whether various performance indicators meet the requirements.
It should be noted that during the installation process, it is necessary to operate strictly in accordance with the requirements of the instructions to ensure safety and installation quality.At the same time, some key installation steps, such as the installation and connection power of motors and blades, must be operated by professionals.