During the installation, use and maintenance process of GS hot water, you need to pay attention to the following items:
Preparation before installation:
1. Choose the right position: In order to give full play to the heating effect of the GS hot water heating fan and improve the experience of the use experience, you need to choose a location that is good and easy to maintain for installation. At the same time, consider the heat dissipation and safety of the equipment to avoid installationIn the corner or near the doors and windows, the heat dissipation effect is poor.
2. Check the integrity of the equipment: Before installation, check the intactness of the heater to ensure that the equipment is not damaged or missing.
3. Install the corresponding heat -media pipeline system: the device for installation valve on the entrance of the heater and the return water support pipe, and set the device of the air -emitted air on the entire pipe system.Make sure that the pipe system is cleaned before connecting it with the heater.
Precautions during the installation process:
1. Fix and support: Make sure the equipment is stable to prevent dumping or shift.The heater can be fixed on the wall with fixed devices such as expansion screws or brackets to ensure stable operation.
2. Connecting pipeline: When connecting the pipeline, it is necessary to ensure the sealing and smoothness of the pipeline, and prevent water leakage or blocking.
3. Power connection: Make sure the power supply connection is correct and safe, follow the relevant electrical safety specifications, use the wires and sockets that meet the specifications, and avoid the use of overload and cause the wires to heat or even fire.At the same time, install the leakage protection switch to ensure the safety of users.
Precautions during use:
1. Preheat: Before using the GS heater, you should first turn on the switch of the heater to allow it to preheat for a few minutes to improve its heating effect.
2. Temperature adjustment: According to the indoor temperature and personal needs, temperature adjustment is performed by adjusting the switch.Avoid using heater for a long time at high temperature to avoid damage or shortening the service life to the machine.
3. Regular cleanup: regularly clean up the dust and debris around the thermometer to ensure its normal operation.
Maintenance precautions:
1. Regular inspection: Check the working status of the heater regularly to ensure its normal operation.
2. Cleaning and maintenance: Regularly use compressed air and water to wash the heaters. After working for a period of time, the application chemistry method removes the scale in the tube.At the same time, hot water should be softened to reduce scale production.
3. Long -term storage: If the warm wind is not used for a long time, the pipeline system should be filled with water to reduce corrosion.
Please note that the above is only some basic precautions. Specific installation, use and maintenance requirements may be different due to factors such as the models, specifications and environmental environment of the GS hot water heater.Therefore, in actual operation, it is recommended to read the instructions of the equipment in detail and follow the operating guide and precautions provided by the manufacturer.If necessary, you can also seek the help and guidance of professionals.