Installation and use of ceiling air -conditioning crew:
1.The crew should be installed in places with good ventilation, non -corrosion, explosive, and conductive dust, and the relative humidity is not more than 85%.
2.Before installing, check whether the outside of the unit is complete and non -damaged, and then turn on the panel to rotate the gauze impeller with the hand to check the sound of metal friction.If there is a different sound, you can adjust the rotor to eliminate it.
3.The water pipe uses the installation method (that is, the water inlet pipe below, and the water outlet pipe) to make the air in the heat exchange device easily discharge.The bottom tube is discharged by condensed water.
4.The entry and exit water pipe should be installed with a valve to adjust the flow or cut off the water source during maintenance.The insulation layer is used to keep the insulation layer.
5.The crew must be installed smoothly and cannot withstand the weight of the water pipe and air duct.
6.After connecting the power supply, check the rotation direction correctly.
7.The controller produced by our company can effectively protect the air -conditioning motor motor to achieve a long life and stable operation. If the controller is not equipped, it is necessary to ensure the three -phase balance of the power supply to each typhoon, and there is lack of phase protection and overload protection.
Features of ceiling air -conditioning crew:
The structure is compact and the volume is small, which is suitable for hanging in the ceiling to reduce the installation space.
There are many ways to return the wind, there is a new wind introduction function, which can effectively improve air quality.
There are independent anti -cold bridges and seal measures.
There are multiple security protection.
Micro -computer control, faulty self -diagnosis function, wired and remote control available options, flexible installation methods, convenient maintenance