In order to ensure the safe operation of the WEX side wall, the following are some key steps and precautions:
1. Installation location: The installation location of the fan should be kept away from high temperature, dust, and corrosive substances to avoid adverse effects on equipment performance.At the same time, it is necessary to ensure that the equipment is installed on a strong and stable basis to avoid vibration and noise during runtime.
2. Clean environment: The environment should be kept clean, the surface of the fan is kept clean, and there should be no debris in import and export.Regularly remove debris such as the dust in the fan and the pipeline to prevent blockage and wear.
3. Power supply facilities: The fan can only run under normal circumstances. At the same time, it is necessary to ensure that the power supply facilities have sufficient capacity and stable voltage. It is strictly forbidden to run.The power supply line must be a special line, and the power supply should not be used for a long time.
4. Abnormal treatment: If abnormal sounds, severe fever of the motor during operation, the motor is severely heated, the shell is charged, the switch is switched, the switching, and cannot be started, it should be stopped immediately.In order to ensure safety, maintenance is not allowed during the operation of the fan.After the maintenance, the trial operation should be carried out for about five minutes to confirm that there is no abnormal phenomenon before starting.
5. Lubricating oil: Supplement or replace the lubricating oil from the bearing or replace the lubricating oil according to the environmental conditions.In order to ensure a good lubrication during the operation of the fan, the number of refueling times is not less than 1,000 hours/time.Close bearing and motor bearing, refueling the ZL-3 lithium-based lubricating oil to fill the inner and outer ring of the bearing inner and outer circles.It is strictly forbidden to operate oil.
6. Storage and handling: The fan should be stored in a dry environment to avoid the moisture of the motor.When the fan is stored in the open air, it should have rainproof measures.During the storage and handling process, the fan should be prevented from bumping to avoid damage to the fan.
The above steps and precautions can help ensure the safe operation of the WEX wall fan.However, the specific requirements of security operations and maintenance may be different due to the different equipment models and the environment.Therefore, in actual operations, it is recommended to participate in the user manual or contact equipment manufacturer to obtain more detailed safe operation guidance.