Electric thermal curtains may encounter some common problems during use, which may affect its normal operation and performance.Here are some common electrical wind curtain issues:
1. No hot air: This may be caused by the excessive dust of the heater, the failure of the PTC ceramic sheet, and the voltage problem.The accumulation of dust may hinder the circulation of thermal air, and the PTC ceramic sheet or voltage problem may affect the normal work of the heater.
2. Large noise: The noise of the air curtain may come from fans or motors and other components.Unexplained fans, damaged bearing or motor failure can cause noise.
3. No wind: This may be caused by the fan failure, motor problem or power failure.If the fan cannot work normally, or the motor fails, the air curtain machine cannot produce airflow.
4. Do not move after power -on: This may be caused by power failure, circuit board failure or sensor failure.If the power supply cannot be powered normally, or the circuit board fails, the screen machine cannot start.
5. Remote control failure: This may be caused by the remote control battery, signal interference, or the fault of the remote control itself.Remote control cannot be performed if the remote control cannot communicate normally with the air curtain machine.
6. Run water leakage (for hot water curtain machine): This may be caused by improper water pipe connection, damage to sealing parts, or water tank rupture.If there is a problem of running water leakage in the hot water curtain machine, it needs to be repaired in time to avoid damage to equipment and cause hidden safety hazards.
7. On the one side, the natural wind is brought out: this may be caused by the air duct design problem or the heater failure inside the curtain machine.This is the case if the heater can only work or the air duct design is unreasonable.
8. Relay noise: The harsh noise of the relay at work may be caused by the loosening or damage of its internal parts.This requires timely inspection and maintenance to avoid further damage to the equipment.
9. Influence of the surrounding environmental operation failure: The curtain machine may be affected by environmental factors such as temperature, humidity, and cause operational failure.For example, high temperature may cause problems such as overheating equipment, and high humidity can cause short circuit circuit.
10. Passing frequently after installation: This may be caused by the problem of power line problems, the equipment overload or protection of the equipment.If the curtain machine frequently trip after installation, you need to carefully check whether there is a problem with the power line and the equipment itself.
In order to maintain the normal operation and performance of the electric heat curtain, it is recommended to clean and maintain regularly, and contact professionals in time when problems occur for problems for maintenance and maintenance.