After buying the WEX side wall, if you want to have better operational efficiency, you must do the installation of the equipment.So, if you want to do well in the installation of this equipment, what are the points of personnel who need to do specific installation work? Let me briefly introduce the following article.
If you want to do a good job of installation of the WEX Wall Fan, you first need to check the fan equipment.After getting the fan equipment, you need to check whether the appearance of the fan equipment is complete and whether the components of the equipment are complete.These tasks must be done well. Only the quality of the fan equipment is good to ensure that the fan can operate normally after installation.
The installation personnel need to carefully read the instructions of the fan equipment.Only after understanding the manual can we know how the fan equipment can be installed correctly.After all, there will be certain differences in different types or different brands of fan equipment. Only after reading the specific manual can we ensure that the installation work can be carried out correctly.The installer must also have a complete installation tool to ensure that the installation of the fan equipment can be carried out smoothly.
The following is to introduce you to the damage to the compressor of the WEX Wall Fans:
1. During the occurrence of the occurrence, the flow of flow is constantly changing, and the changes are relatively large. There may be zero or even negative value.The fierce positive and negative shaking of the fan flow will make a fierce attack on the flow, which will cause a fierce oscillation of the fan itself, and the noise of the joint operation will increase.
2. Due to the fierce pulse and periodic sensation of the airflow, the gas supply parameters (pressure, flow, etc.) shake the air supply and destroy the firmness of the craft system.It will fiercely oscillate the leaves, and the stress of the impeller (referring to the wheel disk installed with a dynamic leaves) greatly increases and the noise worsens.
3. The damage of large -capacity and high -voltage head products is very large, and it may cause damage to the bearing and equipment.The greater the exhaust, pressure ratio, pressure of atmospheric atmosphere and gas of the same unit, the greater the denseness of the gas, the more severe the asthma of the attack, and the greater the damage.