Some users will install a new group at home. Compared with the family fresh air system, the installation and application of the new group are relatively simple, which can be divided into the following 4 steps. Then lets introduce it to you.
1. Open the inspection of the goods
Before installing the application, we must first open the outer box of the fresh air unit and take out the centrifugal fan and the installation application parts.You should check whether the centrifugal fan is degraded and the components are damaged.You also need to review whether the serial number of the outer packaging design and the warranty form and the warranty form will be consistent.
2. Cave the hole accurately
You must first determine the wall surface of the fresh air unit installation and application, and then use a straight ruler to check the height of the installation and application of the centrifugal fans on the wall and make a logo.The construction templates of the construction construction templates are placed on the wall, and the size of the sewage pipeline of the centrifugal fan was marked with an oily mark.
3. Installation and application ventilation pipeline
You can measure the specific address of the fiber laser cutting of the ventilation pipeline with size, and use an automatic cutting machine to make the fiber -fiber laser cutting on the ventilation pipeline.Then use the heat insulation material to wrap the ventilation pipeline and cut the excess insulation material with a scissors.
4. Install and apply fresh air units
Lets put the construction template card paper in the building and install the specific address of the application hole on the wall.Later, everyone applied a flashlight drill to open the hole and knocked the small screws into the hole. The small screws should be exposed to part of the wall.Later, everyone hung the fresh air system on a small wall screw, and inserted the power plug of the fresh air unit on the power socket.