Environmental ceiling hot water heating is a device that is heating through hot water circulation. It uses ceiling installation to not occupy the ground space, making the indoor space more spacious.This kind of warm working principle is mainly to drive the radiator through the motor to make the water in the heat exchanger heating into hot water after heating, and then send the hot air into the room through the air outlet to achieve the purpose of heating.
The installation of ceiling hot water heaters is a process that requires a detailed operation. The following are basic installation steps and precautions:
Preparation before installation:
Confirm whether the model and specifications of the ceiling thermal aircraft meet the actual needs, and check whether there are damaged or missing parts.
Prepare the tools and materials required for installation, such as screw knives, electric diamonds, expansion screws, wires, etc.
Confirm whether the power supply voltage meets the requirements of the ceiling hot water heater to ensure that the supply of power supply is stable and reliable.
Check whether the installation location is appropriate, whether there are pipelines or other obstacles, and determine the corresponding holes on the ceiling board.
Installation process:
When the corresponding holes are placed on the ceiling board, the size should be determined according to the size. Use electric drills and expansion screws to fix the heater on the ceiling board.
The wiring operation is performed according to the wiring logo of the ceiling hot water heaters. Note that the wiring must meet the standard, and firmly clamp the wires on the steel pipe to ensure that the wire tension will not fall off.
Connect the power supply, connect the flat wires to the corresponding wire head according to the logo, and then connect to the power box to the power supply, and connect the power supply for testing to ensure that the heating function is started and operated normally.
Installation Precautions:
The installation location should be selected where the pipeline installation and exhaust wind should be selected, but the water pipe interface installed on the roof should be avoided to prevent water leakage and short circuit.
When installing in a humid environment such as bathrooms, ensure that the heater is installed outside the shower room or above the toilet to avoid hidden safety hazards.
The ceiling hot water heating fan needs to be installed in areas far from flammable and gas leaks to avoid excessive water sources such as faucet and bathtub to prevent leakage or damage.
After the installation is completed, check whether all the connections and fixed parts should be firmly tested again, and conduct a comprehensive test to ensure that the ceiling hot water heater can work normally.
Please note that the installation of the ceiling hot water heaters should be carried out by professionals to ensure the quality and safety of installation.If you are not sure how to install it, it is recommended to consult relevant manufacturers or professional installation services.