Preparation: First, disconnect warm power and ensure that the warmth has cooled down.Then, prepare cleaning tools and cleaner, including rags, sponges, water, neutral detergents, etc.
Clean the shell: Wipe the shell of the heating fan with a wet cloth to remove the dust and dirt on the surface.If the dirt is stubborn, you can use a cleaner to clean, but you should choose a neutral cleaner to avoid using acidic or alkaline cleaner to avoid damaging the surface of the heater.
Cleaning the radiator: The main component of the heater is the radiator. If the radiator is blocked, it will affect the heat dissipation effect of the heater.Rinse the surface of the heat sink with water to remove the dust and dirt on the surface.If the dirt on the radiator is stubborn, you can use a toothbrush and other tools to clean it.
Cleaning power cord and plug: When cleaning the heating fan, also pay attention to cleaning the power cord and plug.Wipe the power cord and plug with a wet cloth to remove the dust and dirt on the surface.If the power cord and plug are damaged or loose, it needs to be replaced or repaired in time.
Storage heater
Clean up the shell and heat sink: Before storing the heater, you need to clean the shell and heat sink of the heater again to ensure that the surface is clean and dust -free.
Dry treatment: After the heating fan is cleaned, you need to dry the surface with a dry cloth to avoid humidity.Then, you can place the heater in a ventilated place to avoid direct sunlight.
Packaging protection: In order to protect the heater, you can cover the heating fan with a plastic bag and store it in a dry and ventilated place.When packaging, pay attention to leaving some air channels to prevent the heating fans from moisture.
Note: When storing the heater, you need to pay attention to the following points:
Avoid putting the heater in a place with high temperature or too low temperature, so as not to affect the performance and life of the heater.
Avoid putting the heater in a humid or dark place, so as not to be moisture or rust.
Before storing, make sure that the heater is completely dry and keeps clean and intact.
If you do not use heater for a long time, it is recommended to start every half a month to maintain the performance and life of the heater.
Through the above steps, you can effectively clean and store heater to ensure the performance and life of the heater.In the process of cleaning and storage, pay attention to complying with the correct operation methods and precautions to avoid causing damage or safety hazards.
The above is the precautions for cleaning and storage of industrial heater