Fire fire -discharge bearing deformation is formed many times because of the imbalance of fire smoke discharge, so as long as the dynamic balance of fire -exhausting manufacturers is guaranteed, the bearings will basically not deform; and there is a to smoke fire -fighting fire bearing bearing brokenThis generally starts from deformation, and then breaks up to a certain degree. Therefore, in order to avoid the broken fracture bearing of fire discharge, basically the solution should still protect the dynamic equilibrium of smoke fire smoke.
Fire fire exhaust fan is in a long -term driving state, the belt has been working, and the friction that occurs damage the belt. Therefore, the belt in the fire exhaust fan should be checked regularly to see if there is any damage, cracks, etc.Replace it in time to ensure the normal work of fire fire exhaust fan.The fixed device of the conditioning top of the motor side is loose, adjust the conditioning top wire on the other side of the motor, and minimize the spacing between the fire -exhausting fume wind machine belt wheel and the motor belt wheel.
The above is the introduction of the bearing deformation and broken problem of fire exhaust fan. I hope it can help you. If you want to know more about information, please pay more attention to us-