Before the WEX side wall is installed, you must fully read the instructions and product samples, familiarize and understand the specifications, forms, leaf rotation directions, and airflow direction of the wex wall; check whether each component is intact, otherwise you should be installed after repairing it before being installed.use.
When installing the WEX wall fan, a safety device must be used to prevent accidents, and the person who is familiar with the relevant safety requirements will be installed and wiring. For the air ducts of the inlet and export of the aircraft, it is not allowed to overlap the pipeline to overlap the weightAdd on the components of the fan; when the fan is installed, pay attention to the horizontal position of the fan. The connection of the combination of fans and the foundation and the air outlet pipeline should be adjusted to make it naturally consistent and not forcibly connected.
After the WEX wall fan is installed, you can use your hand or leverage to mobilize the impeller to check whether there is too tight or rubbing, and there is an item that does not hinder the rotation.The exposed part of the side wall transmission device should also have a protective cover or other installation devices when the air inlet is not connected to the pipe of the air inlet.
The power control box of the wex wall fan must match the corresponding fan.The WEX wall fan wiring should be wiring by professional electrical engineers, and the wiring must be correct and reliable, especially the wiring number at the electrical control box is consistent with the number on the fan wiring column.Grounding, after all the WEX wall fan is installed, check whether there are debris inside the fan.
The above is an introduction to the installation method of the wall fan. Only the correct assembly equipment can ensure its normal operation.For more relevant information, please pay more attention to us- ——