When the color asphalt level in the tank is lower than the composition of the temperature table, close the suction valve before the asphalt pump is terminated to avoid the color asphalt injection in the electric heater.After 2 days, turn on the electric motor and then quickly open the three -way valves; when you add color asphalt within the first time, please quickly open the automatic exhaust valve to make the color asphalt to the electric heater successfully;The valve enables the water level line in the water steam generator to reach a special high and width ratio, close the valve tightly; in the operation of the machine and equipment, pay attention to the water level line and harmonize the valve to keep the water level line maintain moderate ingredients;With water flow, please quickly open the top of the pour in about a 100 ° C, and return to dry in the inner ring in the work;
The asphalt tank can independently manipulate the heat of the modified material emulsion asphalt. The new CNC processing technology cognitive tank is emulsified as the emulsion asphalt heat, and immediately emphasizes the heat of the heat, and the heat in the tank is automatically controlled.It can be fully automatically or auto -automatic or auto -automatic to carry out the mixing and modified material emulsion asphalt as the booking time.
There is a loop settings in the tank, which can be used for fully automatic drying, automatic temperature degrading, etc. It has a lot of styles, which prompts that it is unlikely that many people can be used in the same way, so that the adoption of color asphalt cans will be adopted.The wider.When the machine is equipped with wiring, please check whether the docking is fixed, dense, whether the product is light, the safety channel is connected, and whether the connection between the switching power supply is stable.At that time, when the color asphalt was colored, the automatic exhaust valve should be opened quickly to make the color asphalt to the electric heater successfully.Please full oil storage water tank before fire, quickly open the valve, so that the water level line of the water steam generator reaches a special high and width ratio, and close the valve.
This is introduced to the maintenance operation of the asphalt tank