Breeding heating is a device specially used for factory heating.Widely used in modern sheds, food processing plants and other places.When using aquaculture heating, use it according to the operation instructions.If there is a problem in the process of using the industrial hot fan, it is necessary to repair it in time. So what should I pay attention to when the breeding warm when used?
When using a breeding heater, we will find that it will send the air to the heater through the wind turmoil. Therefore, when using a heater, we must pay attention to the ventilation of ventilation and ensure that the environment of ventilation and air outlet is relatively empty.Make air pass smoothly.In addition, the equipment is heated through the electric heating wire, and the heat air is discharged into the room to achieve the purpose of heating.Therefore, pay attention to the accuracy of the operation to prevent damage to the electric wire.We should maintain it regularly when we dont use a heater.If there is a problem in the process of use, effective measures should be taken to be repaired in a timely manner.
The maintenance of aquaculture fans should start with details. First, check the parts that may have problems with the heater. If the problems are found, it must be improved in time. It is necessary to achieve fine inspections to avoid missing the breeding heater failure.If there is a problem during the use of warm wind machine characters, he will complete the shutdown work in a while, and then check and repair it. In the process of using warm wind machine characters, in addition to regular inspections and maintenance of maintenance and maintenanceIn addition, the elasticity of screws is also a matter of attention.
Snow in winter in the north is relatively common. At this time, the heating fan can be used to help us frozen frozen and solve our troubles.
In winter, snow will follow with the arrival of strong cold air.Because most of the large and medium -sized stadiums are outdoor buildings, after snowfall, a thick layer of snow or ice will be covered.
This is a major obstacle to the activities of the venue.If you want to solve this problem, our breeding fan can come in handy.
A layer of plastic film (thin, soft, transparent) is placed on the spot, and the ventilation port of the mechanical equipment is connected to the aquaculture hotter.Continue to supply high temperature air to the interior, so that the internal temperature is about several times that of the freezing point, and snow can melt quickly.
The aquaculture heater is a tubular heating element made of carbon (C) chemical fiber as the basic raw material.The general settings of upright types are generally used for multi -tube heating, and the body can flip the entire house.After connecting the switching power, the heating speed is very fast.The surface temperature can reach 300-700 degrees in 5 seconds, and the output power can be adjusted between 600-1200W. The output power is relatively large, about 1800 ~ 2000W.
When heating components heating elements are heated, 765.9W/m infrared radiation source can be generated, which is equivalent to spectral instruments.The five types of heating principles are similar, the internal structure is slightly different, and the operation method is basically the same.From a performance point of view, the heater uses the radiant heat tube to dissipate heat, so turn on the power switch, and you can feel that the temperature rises rapidly from 10cm from the body within about 2 seconds.The composite heater is similar to the heater, with fast heating speed, which can instantly achieve the heat value.
For the breeding heater, lets introduce it here first. If you want to know more about information, please pay more attention to us- ——