Environmental centrifugal hot -type hot curtain is a device that uses centrifugal hot air generator to generate hot air. It is mainly used in the fields of indoor air regulation, temperature control and air purification.Its working principle is to inhale the air through a high -speed rotating impeller. After heating through the heater, the hot air is sprayed through the action of centrifugal force to form a hot curtain.
To determine the better installation height of centrifugal hot screen, you need to consider multiple factors, including the height of the door, the size of the space, the flow of the entry and exit channel, the environmental temperature and the speed of the airflow.Here are some suggestions for steps and precautions to help you determine the better installation height:
Consider the height of the door: The air outlet of the wind curtain machine should be above the door, about 2 to 2.5 meters from the ground.Such a installation location can ensure that the wind curtain can cover the entire door and form an effective air barrier.
Consider the size of the space: For large space, the installation height of the windows should be improved accordingly to ensure that the wind curtain can cover a wider range of areas.Instead, the installation height can be appropriately reduced for smaller space.
Considering peoples flow and moving line: The larger the peoples flow, the higher the height of the hot wind curtain in order to install the height of everyone.At the same time, according to the dynamic line, it is ensured that the hot curtain can be covered to the frequent area.
Consider ambient temperature and air flow speed: In extreme environments, you need to combine specific airflow conditions and ambient temperature to adjust the installation height of the hot screen.
In addition, practical experience shows that when the average installation height is between 2.3 and 2.6 meters, the wind speed effect is better.If the installation height is too low, the wind speed may be blocked, and the effect of energy waste and use will decrease.Therefore, it is recommended to adjust the installation height to an appropriate height to achieve better use effects and reduce energy loss.
Finally, please ensure that during the installation process, there should be no gap between the air curtain and the wall, and the appropriate hanging attachment is firmly fixed on the ceiling, and the position of the bottom plate is adjusted according to the actual situation.
In summary, determining the better installation height of the centrifugal hottest curtain is a process of comprehensively considering multiple factors.It is recommended to perform actual measurement and adjustment based on the specific situation and combined with the above suggestions to achieve better installation results.If necessary, you can consult a professional installation personnel or equipment manufacturer to obtain more detailed.