What requirements do I need to meet?In order to ensure that it can work normally, the ventilation, dust removal, and cooling of factories, mines, tunnels, and cooling towers play an efficient role.
1. The installation of the fan should be firm, and the foundation height is ≥200mm;
2. When the hose is connected to the air duct, the length of the hose should not be less than 200mm.
3. Steel support should be fixed on the basis of concrete and add rubber damping pads;
4. The diameter of the outlet pipe can only become larger and cannot be smaller;
5. The last air outlet must be installed with insecticide nets, and the wind hat should be added when the wind is up.
6. The duct connecting to the fan entrance should have a common support, and does not promise to add ballistic components to the components of the exhaust fan.Pay attention to the degree and state of the fan when installing the exhaust fan.
The connection between the combination of the fan and the ground and the wind trajectory must be mobilized to make it complicated, and there is no need to be forcibly connected.Electric reports must be received by electrician with amateur knowledge.The fans power must be intact and must meet the relevant requirements.