It is suitable for natural ventilation or high -temperature smoke exhaust systems such as multi -storey buildings, underground engineering and tunnel construction, drying houses.It can continue to run for 30 minutes under the high temperature standard of 280 ° C. Continuously operating for 20 hours/time at a standard of 100 ° C for the material temperature is not destroyed. It is an idealive fire safety necessary equipment. So what the whole process should you pay attention to when installing smoke?Below is interpreted by the staff of the tobacco production manufacturers, and I hope to have some assistance to you.
1. Tobacco exhaust fan wiring must be appropriately reliable. The smoke exhaust fan case should be properly grounded. The grounding device must be reliable. The switching power supply of the supply and demand of the smoke exhaust fan must be detailed and in line with relevant regulations. The electrical equipment wiring must have professional skillsWelders wiring.
2. The ventilation blasting of the import and export trade of the smoke exhaust fan should have an independent support point. The net weight of the pipeline is not allowed to add the pipeline to the component of the smoke exhaust fan. When installing the smoke exhaust fan, pay attention to the level of the smoke exhaust fan.The connection between the fusion surface of the tobacco fans and the road base should be adjusted, of course, and cannot be forced to connect.
3. After the smoke exhaust fan is installed, the leaf wheels are pulled by hand or pole bars to check whether there is too tight or rubbing the condition, and whether there is a rotating object. If there is no abnormality, you can conduct trial operation.Some of the opportunity gear transmission should have a protective cover. For example, when the air intake of the smoke exhaust fan is not connected, it is also necessary to add a safe protection network or other insurance devices.
4. Learn about the sample version of the smoke exhaust fan in all aspects, and understand the specifications, methods, methods, leaf wheel rotation orientation and cyclone entry orientation of the smoke exhaust fan.Check in all -round inspections, whether the note is detailed, whether the component connection is firm, and check whether the fan blades are detained or deformation due to careful check.
The above is what the whole process should be paid attention to when installing a smoke exhaust fan.