What are the main points of the safety test of the flow -type air curtain?The internal rigid materials of the flow -type air curtain machine are mostly metal materials. The internal wiring of many products will cross contact with the plane edge of the metal plate.The entire appliance shell will easily become a dangerous belt.It is recommended to deal with the metal plate near the internal line, and put on the inside of the insulation rubber strip, the inside of the metal edge roll, the layer of the inside of the inside, or the internal line of the internal line that may be triggered is good measures.In addition, the internal line should also avoid contacting motion components as much as possible.
At present, the flow -type air curtain component lacks the agency consulting agency that conducts CCC certification for home appliances, and the hot curtain machine has just been included in the scope of CCC forced certification. ThereforeThe design concept of the machine has not been combined with the GB4706.1 standard.Judging from the previous situation, the test cycle of the hot -winding machine machine will be longer, the entire certification system is becoming more and more complete, and the security requirements of various components of various components are also updated.Can meet the requirements of certification agencies.In this regard, it is recommended that manufacturers pay more attention to market and certification information, and learn more about the components used by products, and purchase components that meet standards.
The hot screen of the power connection to the inlet of the power supply should add insulating bans to the entrance port to avoid damage to the wire and cable, which affects the insulation.
The above is the main point for the safety test of the flow -type air curtain machine