In our daily life, we can often see industrial warmth. It has brought us a lot of convenience, and has been widely used in various places. What steps do we need when we use it?Let me briefly introduce the relevant knowledge points for everyone.1. Connect the industrial heating connection line (please connect the connection line containing the ground line); 2. In order to make the surface strong, industrial heating should be far from the humid environment and flammable items;The regulator knob is normal to allow the warm power to run; 5. Industrial heating will connect to the heating selection device; 6. Once the room temperature reaches the required, the heating element will stop working, but the fan will continue to work. Once the temperature drops, heating elements will be he heating elements.It will continue to heal; 7. Industrial heating will automatically start and stop, so as to keep the indoor temperature constant; 8. Before turning off the heater, please open the thermostat OFF, then rotate the knob.Cold it; 9. The temperature regulator time is extended. If you forget to turn off the temperature regulator at the OFF position, the temperature regulator will be cut off before turning off the warm, and the fan will continue to work. When the temperature of the heater is close to 50 ° C.When the temperature drops to about 40 ° C, the temperature regulator and fan will stop working, and the warmth will cool down; after use, turn off the heater first, and then pull out the plug;Failure, non -self -reset temperature regulator will be operated, and the equipment will be closed.Remove the plug on the socket to automatically cool the machine, and then use a steel needle to contact the non -self -reset temperature regulator button.When you hear a clear click sound, it means the circuit is connected, insert the plug into the socket, and open the industrial warmth
The above is the use of industrial heater. I hope that the above content can be helpful to everyone. Thank you for your viewing and support. In the later period