1. Trial problem: After purchasing, use it to see if it can run normally without any problems such as abnormal noise.
2. Installation problem: Pay attention to whether the ground is flat when installation, whether the installation of the axis fans is correct, and whether the speed of the axis fans has reached the prescribed speed.
3. Regulate the problem of use: Before the axis flower is operating, it is necessary to determine whether the wind voltage is a rated voltage, and there is no foreign body in the fan
4. Maintenance problem: Whether the maintenance of the bearing of the bearing fan is added on time to avoid liquid and other liquids such as water.If the temperature rise around the bearing of the bearing of the bearing aircraft is found, the temperature and temperature rise of the electrical thought in the operation should be often checked.It is necessary to often check whether the electrical thought bearing is overheated and lack of oil.It should be stopped immediately.The moving body of the bearings, the surface of the roller, the scratching, or loss of the roller surface, whether the gap between the bearing is too large, and the inner ring is rolled on the shaft.The above phenomenon must be updated.
The above is an introduction to the improvement of the work efficiency of the axial flow fan