Welcome to Kena Environmental Technology Co., LTD

What work should I pay attention to in the early ventilioofhe fresh air gas exchangmachine?

Views :
Update time : 2024-06-30

During the construction of the fresh air aircraft replacement, the orientation, elevation, and slope of its pipeline bracket meet the planning requirements, especially in the process of construction, it is necessary to ensure that the slope is within the scale, and the heating dry pipe can be adjusted to adjust the heating dry pipeline.Perhaps filling the pipeline vulnerability open space, in addition to reducing the deviation of the orientation, elevation and planning value. During the construction process, you should try to consider the influencing elements in all aspects as much as possible.The principle of preventing the pipelines from interspersing severe problems such as severe, blocking, and exposed water leakage.The new air system is a new indoor ventilation and exhaust equipment. It can meet the needs of fresh air air -changing needs of 365 days a year. In terms of composition, it is mainly composed of hosting, air ducts, exhaust ports, windows and other accessories.When the host operation of the fresh air gas exchange machine, the turbid air is introduced through the exhaust port, exhaust tract to the outdoor, and the outdoor fresh air is introduced from the window entry. Under the pressure field of the host, to the indoor activity area to meet personnel activitiesNew air volume to ensure the health of the human body.The end of the new wind system has a sufficient amount of air volume and the number of fresh air ventilation.
When using a fresh air gas exchange machine to ventilate, it must be a uniform air exhaust system for demand, that is, the basement is evenly set up the exhaust pipe and the exhaust port. It is used at a normal time.Vanpal ducts and tobacco outlets.Regarding the mechanical air inlet system, it may be a non -connected air duct or a small air duct. This ventilation method will be better than the air supply and the exhaust wind.In addition, each fireproof partition corresponds to a exhaust, smoke discharge system and the air inlet system. The inlet wind and winding well should be set up. The air inlet should be located on the ground.It will be less affected by the fire of fire and gas;
The above is the matters that the fresh air gas exchange machine should pay attention to. I hope that the above content can help everyone. Thank you for watching and support. In the later period

Related News
Read More >>
Pipe connection method of air Pipe connection method of air
06 .18.2024
Air suspension fans are efficient, environmentally friendly ventilation equipmen
Installation and debugging of Installation and debugging of
06 .18.2024
Before installation: Before installation, first prepare the materials and tools
Advantages and adjustment meth Advantages and adjustment meth
06 .18.2024
A centrifugal fan is a mechanical device that relies on input mechanical energy
How to debug a centrifugal cur How to debug a centrifugal cur
06 .30.2024
The debugging of the centrifugal curtain machine mainly includes the following s

Leave Your Message