The well is warm, the coal mines auxiliary well entrance heat, the well -used wells in the well, the mine thermal group, the mine thermal heating unit, the mine thermal group manufacturer, the special thermal group of the mine, the coal mine well thermal group, the coal mine well steam thermal group, the mines mouth hot group, the mines mouth hotThe supplementary regulations for heating and warmth of the well entrance of the well entrance to do a good job of the well -heating and heating work, ensure that the temperature of the main well supply the air supply temperature meets the safety regulations of the coal mine, and effectively prevent the well -equipped of the well -equipped wall of the well in the well.The mine thermal group is a mine ventilation heating system, which mainly solves the frozen phenomenon that may occur due to too low temperature in the well.The implementation of this technology can control the ventilation temperature of the well at above 2 ° C to effectively prevent freezing to produce safety.The advantages of the mine thermal group: stable performance; automatic operation to achieve no one on duty; obvious energy conservation effect; long life, unsteady overall performance; high -level electromechanical integration structure, facilitating installation, maintenance and management.It is a replacement product of the traditional air heater.The heat source can be selected with hot water, steam, and electric heating.Its selection depends on Party As thermal source conditions and air temperature requirements.Electric heating device: Wing-tube electric heater has dustproof and moisture-proof capacity, which is a stable and applicable product; explosion-proof electric heating device protection level IP55, suitable for use of explosion-barrier requirements (EXI-BT3);Mining ventilation intelligent electricity heating system: 1. Concentrated air supply temperature control, greater energy -saving.2. The RS-485 network communication is used internally.3. Touch screen control, accurate information and instant information, can achieve remote monitoring.4. Voltage (380/660V) is flexible and saved for installation costs.5. Successful and safe operation cases for many years, rest assured choice.1. Electric heating power is an optional parameter within the calibration range.2. Products with power greater than 15KW can be used to order and heat up when ordering.3. When you need to send a product with stable air temperature, you need to support the smart PID control system, please contact us in time.Safety protection during use: 1. Due to industrial heat and the air temperature sent out very high, be careful to avoid burns, and pay attention to hot exports at all times when used; 2. During the use of heatWhen flammable and prone to storm, its concentration must be diluted to 1/50 ~ 1/100 of the explosive limit, so as to effectively prevent accidents; 3. If there is an emergency, you can directly follow the sudden brake consistency.After shutting down, after the safety is resolved, it can be restored and restored, so as to bring limited user use safety.4. Because industrial heat is a thermal product, its main function is heating and heating, so you must pay attention to moisture -proof and waterproof during the use process to avoid damaging the introduction of thermal steam and hot water -type ore air heating units. If you need to learn more, you need to learn moreInformation, please pay more attention to us