The air curtain is usually installed at the junction of indoor and outdoor, such as above the door, not completely installed outdoors.Its main purpose is to effectively isolate indoor and outdoor air, thereby preventing the exchange of hot and cold air, blocking dust, pollutants, and insects into the room, maintaining the indoor temperature stability and cleaning.
When installing the air screen, you need to meet the following requirements:
Gate frame requirements: confirm whether the door head has enough location to install the air screen.If the door frame is plasterboard, hollow wood or glass door frame, it is recommended to use corner steel and brackets for installation to avoid the air curtain falling accident.
Entry inlet requirements: The air curtain is mostly horizontal air inlets, part of which is against wind.When installing, be careful not to block the air inlets of the air curtain, and the reserved distance of the air inlet should not be less than 5cm.At the same time, the angle installation adjustment of the air curtain machine is also the key to ensuring the effectiveness of the use of the screen.When installing the air curtain machine, it is necessary to ensure that the sprinkler mouth and the door frame have a proper tilting angle. It cannot be installed vertically. The tilt angle should not be too large or too small.
Width requirements: The width of the outlet of the air screen should be slightly greater than or equal to the width of the door to ensure that the wind energy is evenly distributed on the area of ??the door.For the large door width, multiple air curtains may be used to enter the wind from the two -terminal.
High requirements: The installation height of the air screen should be appropriate. Generally, it is recommended to install it in the upper part of the door. It does not occupy the building area and does not affect the beauty of the building.At the same time, it is necessary to consider the air supply distance of the air screen to ensure that the indoor and outdoor air can be effectively separated.
Power and environmental requirements: Check whether the machine equipment is normal, whether the appearance is complete, and whether the accessories should be complete.The position of the power supply should be far away, and the power line should not be connected.In addition, you should also pay attention to the requirements of the environment, such as altitude, environmental temperature, and relative humidity.
Safety requirements: The air curtain should be installed in a strong place to prevent its safety from affecting vibration.When the width of the door is wider than the air screen, it can be installed by multiple typhoon curtains. The distance between each typhoon curtain can be kept 20 to 50mm.In addition, do not install the ordinary curtain machine of the plastic impeller at high temperature, high humidity or explosive gas and corrosive substances.
In general, when installing the air screen, you need to consider the requirements of the door frame, air inlet, width, height, power supply and environment, and safety to ensure its normal operation and use effect.If you are not sure how to install or have questions, it is recommended to consult a professional installation personnel or air curtain supplier.