When cleaning the hot water type, you need to follow the following steps to ensure safety and effective cleaning:
1. Preparation
1. Power off and cooling: First of all, it is necessary to ensure that the heater is off -power, and the fuselage has naturally cooled.This can avoid accidents such as electric shock or burns during cleaning.
2. Tool preparation: Prepare tools such as broom, mop, vacuum cleaner, clean soft cloth, brush and other tools for cleaning up dust and dust.Note that it is better not to use chemical cleaner because it may remain on the hot fan.If a cleaner is really needed, it should be ensured thoroughly.
3. Protective electrical part: Use tape or plastic bags to cover the electrical part to prevent accidents such as water inlet.
4. Personal protection: wear gloves to protect your hands.
2. Cleaning process
1. Clean up dust: Use a vacuum cleaner, brush and other tools to clean up the accumulation of dust outside the hot fan.For the dust inside the machine, especially the dead angle, you can use a small dust collector or a small brush for cleaning.
2. Cleaning filter: The filter is the part with the most dusty dust, which requires attention.After removing the filter, wash it with your hands or small brushes, and then wash it with a washing solution.Note, do not let the water splash on the electric heater heater to avoid damage to the component.
3. Clean the body: Use a clean soft cloth to wipe the surface of the body on the body. Do not use too wet cloth to avoid water.Better choose a special electrical cleaning cloth for cleaning.
4. assembly and detection: After the cleaning is completed, the assembly device and related parts, and the power detection function is normal.
Third, clean after cleaning
1. Regular cleaning: In order to maintain the good operation of the hot fan, it is recommended to clean it regularly (such as each season) to prevent dust accumulation.
2. Avoid the humid environment: When the hot air is not used for a long time, try to avoid placing in the humid environment as much as possible, so as not to occur inside the machine.
3. Timely maintenance: If there is a problem with the heat fan, contact the maintenance professionals in a timely manner for repair or replacement.
The above is the cleaning of hot water heater