Before installing, check whether it is intact and loss of or not. Whether the foot bolts of each standard parts are loose or dropped, and whether the centrifugal leaf wheels hit the wind cover.Check the fan blades or shutters in the entire process of transportation.
2. When installing the natural environment of ventilation, you should pay attention to the ventilation outlet cannot have a lot of hindrance to the door 2.5-3m.
When installation of smoke exhaust fan
1. Stable installation: When installing the fan, pay attention to the level of the fan to adjust the level of the fan and the foundation plane.After installation, the motor cannot be crooked.
2. When installing a fan, the adjustment of the motors adjustment is located at a convenient and practical part.Adjust the transmission band tightly when the use is convenient to use.
3. When installing a fan support rack, it is necessary to make the supporting frame and the foundation flat level firmly, and timely install corner steel to carry out reinforcement of corner steel next to the fan.
4. After the fans are installed, check the tangible surroundings.If there is a gap, it can be seal with PC sunboard or structural glue.
After installation of smoke exhaust fan
1. After the installation is installed, check whether the inside of the fan is left to leave the left -left special tools and dirt.Rotating the fan blades forced or the barbar, check whether it is tight or rubbing, and whether there is no abnormal situation of rotating objects, you can conduct trial operation.
2. If the wind turbine vibration or the motor has a "buzz" occur during operation, an abnormal noise or other abnormal conditions should be turned off and checked.
The above is the installation notice for the installation of smoke exhaust fan