Environmental glass fiber reinforcement axis is a shaft flow made of FRP (FRP).FRP is a material with the characteristics of corrosion resistance, acid and alkali resistance. Therefore, the axis flow of FRP has a good anticorrosive performance and is suitable for humid and corrosive environments.
When installing the glass fiber reinforcement fan, you need to pay attention to the following points:
Before installing, check the fan carefully or damaged during transportation. Whether the solid parts are loose or fall off, whether the impeller is touched, and check the parts of the fan.At the same time, prepare all kinds of materials, tools and venues required for fan installation.
Pay attention to the installation location of the fan during installation. It is necessary to ensure that the import and exports are not hindered, and the fan should be installed at the horizontal position to avoid tilt or vertical installation.
The wiring of the fan must be correct and reliable, the shell should be properly grounded, and the ground must be reliable.The power supply of the fan must be complete and meets relevant requirements.
After installation, check whether there are leftover tools and debris inside the fan, and pull the impeller by hand or leverage to check whether there is too tight or rubbing to ensure the normal operation of the fan.
During the installation process, you should pay attention to the level and vertical position of the fan to avoid being too high or too low, which affects its use effect.At the same time, choose the appropriate installation method and fan model according to actual needs.
After the installation is completed, the trial movement should be performed to check whether the fan is running normally, there are abnormal sounds or vibrations.The current should be strictly controlled during the trial transportation process, which cannot exceed the rated value to prevent the motor from being destroyed.
In short, when installing the glass fiber reinforcement fan, you need to pay attention to the details to ensure that the installation is correct and reliable to ensure the normal operation and use of the fan.At the same time, we must follow relevant safety specifications during the installation process to ensure operational operation.