The use of environmentally friendly thermal water heating mainly includes the following steps:
Connect the power supply and water pipe: insert the power plug into the socket to ensure that the power supply is connected.Then connect the water pipe, pay attention to the water pipe interface to be tightly connected to avoid leakage.
Open the water inlet valve and water outlet valve: There are water inlet valves and water outlet valves at the bottom or side of the heater, and open the water inlet valve to allow the water to enter the inside of the heater.At the same time, open the water outlet to allow the hot water in the inside of the heater to the outside.
Adjust the temperature: The temperature of the hot water heaters can be adjusted by the adjustment button.Generally there are three gears: high temperature, medium temperature and low temperature, and choose as needed.
Turn off the hot water heaters: After use, turn the temperature controller and gear to turn off to the closed state, and then turn off the power within 2 minutes.This can ensure that the heat dissipation is well dissipated after the heater is closed, and the service life is extended.
In addition, the following items need to be paid when using hot water heating fans:
Clean and maintenance: regularly clean the surface and internal components of the heating fan to maintain the clean and good heat dissipation performance of the equipment.At the same time, regular maintenance and maintenance are carried out according to the actual situation and manufacturer suggestions.
Safety precautions: In the process of installation and use, we should always pay attention to safety.Avoid dangerous situations such as electric shock and burns.At the same time, we must follow the instructions and security guidelines of the equipment.
Use environment and conditions: Pay attention to the use environment and conditions of the equipment to avoid failure or damage.For example, avoid equipment in a humid environment and maintain good ventilation.
In summary, the use of hot water heater includes steps such as connecting power and water pipes, opening the water inlet valve and water outlet valve, adjusting temperature, and closing equipment.During use, we need to pay attention to safety and maintenance, and follow the environment and conditions of the equipment to ensure the normal work of the equipment and extend the service life.