The installation requirements of environmentally friendly thermal water heating mainly include the following points:
Installation location: Select a place with good ventilation, dry air, and near the heat source for installation. At the same time, considering the size of the equipment and heat dissipation needs, the indoor space is reasonably planned.Ensure that the air inlets and air outlets of hot water heaters will not be blocked to ensure air circulation and heat dissipation effects.
Installation height: Choose the appropriate installation height according to the actual situation. It is necessary to ensure the heat dissipation effect and avoid the use of indoor space too low.Generally speaking, the installation height of the hot water heaters should be determined according to the height of the equipment model and indoor space. It is recommended to participate in the instructions or consult the manufacturer.
Equipment fixation: Environmental protection hot water heaters should be installed on a solid basis to ensure that the equipment will not shake or fall off.For the installation of the wall structure parts, the equipment should be firmly fixed on the wall with a suitable fixed part.
Pipeline connection: The water inlet pipe and water outlet pipe of the environmentally friendly hot water heaters shall be firmly connected to the hot water supply system, and there shall not have leakage.A circular hot water pump should be equipped on the water pipe road to ensure the circulating flow of hot water.
Power wiring: The power wiring of environmentally friendly thermal heating fans should meet the requirements of electrical safety, and the wiring should be firm and reliable, and there is no wire or joint.The motor wiring should make the fan impeller rotate in the direction of rotating signs.
Debugging and running: After the installation is completed, the hot water heater should be conducted for debugging and running to ensure that the equipment is running normally, no abnormal noise and vibration.At the same time, check whether each connection should be tight.
It should be noted that the installation of hot water heaters should be carried out by professionals to ensure the quality and safety of installation.During the installation process, we should strictly follow the equipment manual and installation requirements, and must not change or omit the installation steps at will.