The hot wind curtain has microorganisms such as dust, flue gas, odor, and insects to produce high -speed airflows, divide the two independent areas of the room surface, adhere to the effect of indoor air conditioners and purifying air, save electricity together and make air circulationEssenceAvoid cold, heating outflow, saving electricity, and continuously formed air doors, which can be useful to avoid cold and heat leakage.Save electricity and divide the two independent temperature areas in the room surface. When the air conditioner is running for a long time, the auxiliary circulation conditioning temperature will be the purpose of saving energy and improving the environment.Below is the maintenance of hot -winded curtain machines recommended by hot curtain manufacturers:
The maintenance method of the hot -winding curtain machine mainly includes the following steps:
Daily inspection: Daily inspections should be started from many aspects, including regular check whether the air volume is normal and whether the temperature is reached standard.If you have any problems, adjust it in time to avoid subsequent use.
Regular cleaning: The hot -winded curtain machine needs to be cleaned regularly to achieve its functions such as insulation and blocking air.During the cleaning process, even if there is a filter such as a filter, there will be dust, oil and other accumulation inside the machine for a long time. If it is not cleaned in time, it will affect the normal operation of the machine.Especially in public places, such as shopping malls, airports, etc., the hot -winded curtain machine is installed at the entrance and exit, and the hot air output will almost be transmitted near each entry and exit.It may pose a threat to human health.Therefore, regular cleaning is very necessary.
According to the weather, the air volume is regulated: In daily use, the hot -screen machine should be adjusted in time according to the weather.Generally speaking, the temperature required for indoor is constant, but the outdoor weather is changeable.In the use of hot -screen machines, the air volume should be adjusted in a timely manner according to the heavens. This can not only reduce energy consumption, avoid unnecessary waste, but also make the hot -screen machine efficiency higher.
Surface cleaning: The white surface of the hot -winding machine is easy to stick to dust, and it is necessary to clean it with a soft cloth to effectively remove the dust on the stainless steel shell.When the surface of the thermal curtain machine is too dusty, you can use warm water to mix a neutral washing agent and dip the cloth to wipe the outer surface.It should be noted that the surface of the thermal curtain machine cannot be cleaned with corrosive cleaners, and excessive acid or alkaline detergent will hurt the shell of the hot -screen machine.In addition, it is not possible to use a hard brush to wash the shell of the thermal curtain machine, otherwise it is easy to form irreversible scratches.
Internal cleaning: After the hot -windows are used, the humid parts of the interior will also breed a variety of bacteria.Therefore, after using the hot -winding machine machine, we must also pay attention to the cleaning inside the hot curtain machine.You need to unload the shell of the wind net or the hot -windows, and use a hair dryer to blow off the internal dust.If conditions permit, the effect of using air compressors will be better.But be careful not to clean the heating body with a wet cloth or water.