Environmental protection High temperature High humid axis flow is a special type of shaft flow that is designed to work in high temperature and high humidity environment.The following are some basic information and characteristics of high temperature and high humidity axis flow:
Working principle: The working principle of the axial flow fan is to enter the impeller through the rotation of the impeller, so that the gas enters the impeller from the inlet axis, and is pushed by the leaves of the impeller to increase the energy of the gas, and then flows into the guides.The guide leaves turn the deflection air into axial flow. At the same time, the gas is introduced into the voltage, which further converts the gas kinetic energy into pressure energy, and finally introduces the working pipeline.The working method of the shaft fan blade is similar to the wing of the aircraft.
Application scenario: High -temperature and high -wet shaft flowers are widely used in industrial ventilation, building ventilation, agricultural greenhouses, aerospace and cooling equipment.For example, in large commercial buildings, industrial factories, office buildings and other places, high -temperature and high -humid axis flowers can be used for the design and operation of building ventilation systems, realizing the circulation of indoor air and the introduction of fresh air, and improving indoor air quality.In addition, they are often used for fire and ventilation systems to help smoke, heat, and ensure the safety of personnel.
Features: High -temperature and high -humid axis flowers have the characteristics of compact structure, reliable operation, safe and reliable, convenient maintenance, small volume, high protection level, reliable on -site operation, low noise, and long service life.They can maintain stable performance in high temperature and high humidity environment and bear certain thermal load and humidity changes.
Transmission method: The transmission method of high temperature and high wet shaft fans includes D and C.The D -type transmission method uses a joints to connect the spindle and motor axis of the fan, or the spindle and the motor transmission shaft are the same shaft on special occasions.The C -type transmission method is to connect the main axis and motor spindle through the belt and belt wheel.
In general, high -temperature and high humid axis flowers are a ventilation equipment that adapt to high temperature and high humidity environment. It has a wide range of application scenarios and excellent performance characteristics.When selecting and using, it is necessary to perform appropriate configuration and installation according to the specific environmental conditions and needs.