The installation location of the hot water -type hot screen is generally selected at the entrance or window of the building.The following is the main reason:
1. Blocking cold air: One of the main functions of the thermal curtain is to block the cold air from entering the room.Installed at the door or window, it can effectively play this function.
2. Safety and maintainability: When selecting the installation position, you need to ensure the safety and maintenance of the equipment installation location.
3. The size and wind pressure of the hot screen: If the height at the door is greater than 3 meters, when choosing the hot screen, you should choose the device with large wind pressure to ensure that the wind intensity that the thermal curtain can provide can be covered on the ground.
4. Prevent temperatures from being too low: The hot -winding curtain is installed on the indoor side. In addition to providing heat, the temperature must be prevented from being too low.
5. Reserve power: Before installation, you need to reserve a power supply that is consistent with the requirements of the hot curtain.
6. Drainage facilities: If it is water heating, before each work, it is necessaryThe curtain can run the hot screen better and safer.After the end, it is better to put the water inside the trail in advance to prevent the weather from cold and frozen pipes.
In general, the installation location of hot water -type hot screen needs to fully consider its functions, security, maintenance needs, and equipment size and wind pressure.At the same time, pay attention to the installation of drainage facilities to ensure the normal operation of the equipment.
The above is the introduction of the installation location of hot water -type hot screen, I hope it can be helpful to you.If you want to know more about related information, please pay more attention to us--