1. The shaft flow is allowed to use simple packaging forms, but the motor, instrument, bearing, couplet, and belt wheels must ensure waterproof and moisture -proof, and the instrument should be anti -vibrating.
2. Before the packaging, the stagnant water inside and outside should be discharged and fully dry.
3. The exposure and processing surface of the shaft fan components need to be applied to the rust -proof layer. If necessary, there should be a protective device.During the transportation and storage period, it must not be damaged, rust, and the entry of external substances.
4. Protective measures should be taken for the flange connector, and 10 mm or thicker wooden boards or other appropriate materials can be used on the flange surface.
5. Protective measures should be taken for the tube seats of the thread and welded connection. The bolts or rapidly pressing the device should be fixed tightly, and cast iron plugs or wood plugs are not allowed as a protective device.
6. The end of the welded parts of the docking should be protected by wooden boards. The wooden board should cover the area of ??the entire welding end and fix it with a metal belt or fastener.The cover, metal belt, and fasteners must not be welded on the machine.
7. The axis flower should have support for installation and application. All bulk parts should be transported in board boxes or boxes.
8. For large and pretty vectors, there should be pads that are convenient for moving. For the plate box, the rings should be considered and the labels should be made.
The above is the problem that you need to pay attention to when the packaging shaft flowers. I hope it can be helpful to you. If you want to know more about more information, please pay more attention to us- ——