Industrial warm maintenance skills mainly include the following aspects:
1. Periodic cleaning: Perform a comprehensive cleaning of the equipment once a week. Use a soft cloth or sponge to wipe the shell, filter and internal heating element to avoid using hard object scraping and chemical cleaners or water directly to avoid damage surface and surface and surface and surface and surface to avoid damage surfaces and surfaces and surfaces and surfaces.equipment.
2. Replace the filter element: If the heater is equipped with a filter element, it needs to be replaced regularly. According to the manufacturers recommendation, it is usually replaced every few months or a year.
3. Check the electrical connection: Check whether the electrical connection of the heater is tight to avoid loosening or damaging, and ensure that it runs stable.
4. Maintenance of the burner: If the heater is fuel, it is necessary to keep the burner regularly, clean up carbon accumulation, adjust the ignition time, etc. to ensure the combustion efficiency.
5. Lubricating parts: For components that need to be lubricated, such as fan bearings, an appropriate amount of lubricant should be added regularly to ensure its normal operation and extend the service life.
6. Check the electrical components: regularly check the electrical components of the heater, such as switch, temperature controller, etc., whether to work normally. If you have any problems, replace or repair it in time.
7. Storage and custody: When not using a heater, it should be stored in dry and ventilated places to avoid moisture and corrosion.At the same time, unplug the power plug to avoid damage caused by long -term power.
Please note that the industrial heater of different models may have different maintenance methods and requirements. Therefore, when maintenance, it is recommended that the user manual or contact the manufacturer to obtain specific maintenance guidance.At the same time, maintenance should be carried out by professionals to ensure correct operation and safety.
The above is the maintenance technique of industrial heater