The main advantages of environmental protection vertical air -conditioning air conditioning crew include high -efficiency energy saving, large air volume long -distance air supply, and intelligent control.It adopts advanced compressor technology and efficient heat exchangers, which can reduce energy consumption at runtime and achieve energy -saving effect.At the same time, the large air volume of the unit can ensure that the cold wind or warm air can be covered at a farther distance, and the uniform cooling or heating up the entire space can be achieved.
The installation of vertical shooting air -conditioning air conditioning crew is a relatively complicated process. It is necessary to pay attention to multiple aspects to ensure its normal operation and long -term use effects.The following are some key installation precautions:
Position selection: Select a position that is good and easy to maintain, stay away from thermal sources and obstacles to ensure that there is enough space around the unit.This helps avoid the units overheating or is disturbed by other objects.
Basic preparation: Make a solid foundation based on the data provided by the manufacturer to ensure the flat and clean ground, and perform the necessary foundations.A solid foundation can prevent the crew from vibrating or displacement during operation.
Equipment unloading and inspection: Be careful of the boxing, check whether the parts are intact.This includes key components such as host, pipeline, controller.Any damaged or missing parts should contact the supplier in time to replace or supplement.
Install the host and pipeline: Place the host on the basis according to the instructions to ensure the level and fixed.Connect the power cord and gas source.At the same time, the refrigerant or water pipeline is laid according to the design drawings to connect the in and out of the air outlet.Pay attention to the direction of the pipeline reasonable and avoid excessive bending to reduce energy loss and noise.
Controller installation and testing: Install the controller in an easy -to -operate position and connect to the host and external equipment (such as the temperature controller).After the installation is completed, turn on the power to check whether all the connection is firmly, and perform a running test to ensure that the unit work is normal.
Protective measures: Install the protective cover to prevent dust and accidentally touch.At the same time, ensure that local fire protection and safety regulations are ensured to prevent potential safety risks.
Prevent Freon leak: During the installation process, special attention to prevent Freons leakage.After the installation is completed, it is necessary to let the installed personnel detect the interface to ensure that the system is well sealed.
Prevent indoor and outdoor leakage: When installing, ensure that the condensation water generated during air conditioning can be discharged smoothly to the outdoor, and at the same time, the outdoor unit is prevented from entering the room during the heating of the inside and outside during the heating of the internal and external temperature.
In addition, it is necessary to pay attention to fixed indoor machines. It is necessary to ensure that the indoor unit is stable and firm, and avoid vibration or displacement during operation.You can use ground foot bolts to fix the unit on the cement floor or install a wooden base under the unit.At the same time, in order to prevent the unit dumping, anti -inverted measures can also be taken, such as setting an anchoring of the right -angle iron sheets on the top of the unit or installing the anti -tilt floor fixture in the lower part of the unit.