How can the products of hot -windows be classified?
one.Can be divided into
Large -scale hot curtain: The first applies to large shopping malls and industrial and mining enterprises.
Small hot screen: The height of the device does not exceed 3 meters, and the energy consumption of the hot curtain is small
two.It can be divided into a large -scale heat media can be divided into
Electric thermal curtain: convenient use, no pollution, low installation cost, economical applicable, good effect
Hot water and hot curtain: high requirements for the water temperature of the system pipeline, saving electricity
Steam hot curtain: large steam consumption, restricted by the steam volume of the boiler, good effect
three.It can be divided into the direction of the air supply
Getting on the wind and hot screen (top blow): The wind direction is from top to bottom, most of the hot screens are in this way
Side wind and heat screen (side blow): horizontal air delivery, this method should be adopted when the device exceeds 5.5 meters
Four.Can be divided into use by using motor
The flow of flow type: the air volume is small, the device height below 2.8 meters
Axial flow -type hot curtain: small air volume, device height below 3 meters
Corresponding hot curtain: the air volume is large, you can adjust the height of the device according to the power of the motor, not exceeding 5.5 meters
The above is a brief introduction about air curtain classification