Q -type warm installation height standards can be adjusted according to different application environments and needs, but generally speaking, the choice of installation height should ensure that the warm hot air should be uniformly distributed to the room to form a warm environment atmosphere.
When installing the Q heater, it is recommended to install a height of less than 4 meters, which helps the hot air of the heater to circulate better in the room.At the same time, the specific installation height also needs to consider the following factors:
1. The height of the room: If the height of the room is high, the installation height can be increased appropriately to ensure that the hot air of the heater can cover the entire room.However, if the room height is short, the installation height needs to be reduced accordingly to prevent the heater from being too close to the ground and affect the use effect.
2. Emperor flow requirements: If a strong airflow cycle is formed in the room, the installation height can be slightly lower, which will help the hot air in the heating fan to spread to all corners of the room faster.However, if you only need to provide local heating in the room, the installation height can be slightly higher to prevent the heat from being too concentrated in a area.
3. Safety factors: When installing a Q heater, safety factors need to be considered.The installation height should ensure that the hot air of the heater will not blow directly to the human body or flammable items to avoid the occurrence of dangerous situations such as burns or fires.
In short, the installation height of the Q heater should be selected according to the actual situation to ensure that it can play a better heating effect and ensure the safety of use.At the same time, during the installation process, relevant installation standards and specifications need to be followed to ensure the quality and use effect of installation.
The above is the high standard of installation of Q -type heater