The 3C tobacco fire prevention valve is installed on the fired fire prevention facility on the mechanical equipment. It is reasonable that it is not easy to be touched. The probability of deformation is very small. How does the noise come?
Although the 3C to smoke fire prevention valve is installed in a machine to smoke fire and fire prevention valve, there are indoor ventilation in the tube road, and sometimes there are smoke and dust.In the past long and in the past, when the commodity circulation on the fire and fire prevention valves of the gas discharge, the dust and the dust in the gas will also fall into each position of the smoke exhaust fire prevention valve.The method ensures that the dust layer is well -proportioned, so the smoke discharge fire prevention valve is gradually damaged to the fire and fire prevention valves. As the vibration of the fire and fire prevention valve of the smoke discharge increases, it will cause noise.
The noise of the 3C smoke exhaust fire valve is caused by vibration, and what is the vibration of the fire valve caused by?
1. Tobacco -fire prevention valve installation is often used in supporting rack foot bolts that are not tightened well, and the fire valve will cause vibration;
2. The main axis of the fire prevention valve changes, or the leaf axis set is connected to the screws and removes the screws, and the smoke and fire prevention valve will also cause noise during fitness;
3. The touches of the smoke and fire valve and the supporting support rack are uneven, causing vibration at work and causing noise;
4. Before the fire prevention valve was installed, there was no careful inspection of the oil circuit board. The oil circuit board had bumps and bumps and was not found. Instead, it was used in the engineering project. It caused vibration and noise during the work of smoke and fire prevention valves.
The above is the reason for the noise of the 3C smoke fire prevention valve